Trends Identified
Off-shore wind farms
Global growth in electrical capacity at wind farms in the period up to 2035 is expected to be approximately 860 GW, 20% of which should come from high-tech sea-based wind farms. These will be built fastest of all; their total power, according to experts, should grow by more than 40 times, which grounds the interest to off-shore wind farms. At present wind farms’ share of total electricity generation is no more than 1.7%, with the majority only serving as pilot projects. The spread of this type of power plant will make it possible to significantly expand the use of wind’s resources and avoid a number of problems related to the development of land-based wind power, such as the inability to use the land for other economic activities, noise pollution, and the influence of strobing, etc. Off-shore wind is more of a “quality” resource for wind energy, as it is characterised by greater average annual speeds and continuity.
2016
Russia 2030: science and technology foresight
Russia, Ministry of Education and Science of the Russian Federation
Alternative motor fuels
Alternative motor fuels are intended to satisfy future demands for liquid fuel and are characterised by acceptable costs, minimal environmental and health impact, and increased reliability of supply to domestic markets. In relation to the expected growth in demand for motor fuel, which in Russia now accounts for at least 80-85% of petroleum product output, this alternative product could replace an increasing share of fuels derived from crude oil. According to experts, the likelihood of such fuels competing with traditional fuels after 2020 is high.
2016
Russia 2030: science and technology foresight
Russia, Ministry of Education and Science of the Russian Federation
Fuel cells
Fuel cells are also potential avenues for development in environmentally-friendly energy. The development of devices offering direct conversion of a fuel’s chemical energy into electricity has for several decades laid claim to the role of a breakthrough technology capable of completely revolutionising the energy sector. The achievements of recent years have brought this technology close to the stage of mass commercial adoption and have regained interest from energy companies. Three main types of fuel cells use are being considered: stationary energy (electricity generation, cogeneration, uninterruptible power supply units); transport energy (power sources in electric vehicles, trucks, military equipment, spacecraft, etc.); portable energy (power sources in mobile devices, battery chargers, etc.). The key strengths of fuel cells are considered to be their high efficiency factor (60–80%) and small size. Shortfalls include the lack of infrastructure for charging and the high cost of platinum which is used as a catalyst.
2016
Russia 2030: science and technology foresight
Russia, Ministry of Education and Science of the Russian Federation
High-efficiency photo converters
In the near future, solar energy will be based primarily on the use of various types of highly-effective photoconverters. One of its key advantages is the ability for end users to generate electricity directly, which makes it possible to save on the development of the electricity networks. Currently new promising photoconverters are being actively developed. The technology previews using the full spectrum of solar radiation, characterized by high efficiency factor and long life. Photovoltaic power sources are used to supply power to consumers across a broad power spectrum: from several watts (mini-generators for watches and calculators) to several megawatts (power stations). One key use of photovoltaic converters is in various types of solar arrays; transport and aviation applications for solar arrays are currently under development.
2016
Russia 2030: science and technology foresight
Russia, Ministry of Education and Science of the Russian Federation
High capacity electrochemical batteries
Electrochemical batteries to store electricity (accumulators) have seen widespread use in many sectors, primarily for mobile devices and on transport, as well as in stationary units – to provide an uninterrupted supply to important devices (communications, computer equipment, etc.). High capacity electrochemical batteries, used in the energy sector for relatively long-term storage of electricity, could play an important role in distributed generation systems to provide an operational reserve and stabilise the electrophysical parameters of local power systems, including regulating the frequency and voltage. The use of next-generation electrochemical batteries will make it possible to increase the competitiveness of renewable energy sources and to practically implement the distributed generation concept – increasing the load and efficiency of traditional electricity generation units through the opportunity to store energy, increasing the quality of the electricity supply to end consumers, reducing electricity loss in the power grids, cutting development and operating costs for trunk power lines, storing electricity and creating an operational power reserve directly at consumers’ location.
2016
Russia 2030: science and technology foresight
Russia, Ministry of Education and Science of the Russian Federation
“smart” networks, including micro-networks
The development of “smart” networks, including micro-networks, is aimed at reducing the cost of electricity and creating power reserves directly at end consumers’ location. The result of further improvements to this technology should be an increase in the reliability and security of power supplies, higher levels of technological processes’ computerization, the introduction of digital technologies and microprocessor equipment into monitoring and control systems, and reductions in operating costs. Demand for these technologies and equipment in Russia is relatively high, due to the need for large-scale renovation of Russia’s electrical energy sector. The growth in global demand for electrical equipment also creates high export potential.
2016
Russia 2030: science and technology foresight
Russia, Ministry of Education and Science of the Russian Federation
Closed nuclear fuel cycle with fast neutron reactors
One of the limitations for modern nuclear energy with an open nuclear fuel cycle and thermal neutron reactors is the significant and ever growing amount of stored irradiated nuclear fuel. Moreover, these technologies do not make it fully possible to use the energy stored in nuclear energy resources, as more than 90% of extracted uranium remains in enrichment plant heaps, and the effectiveness of the fuel’s use in hot water reactors is low. An integrated solution to existing problems is possible by concentrating efforts and resources to develop next- generation nuclear energy based on fast neutron reactors with a closed nuclear fuel cycle. This is a set of connected technological solutions, capable of guaranteeing extended reproduction of fissile nuclear material together with generating electricity while minimizing radioactive load on the environment across all technological conversion stages and, thus, having a revolutionary impact on the global nuclear energy market. A further benefit of the closed nuclear fuel cycle is the ability to use fast neutron reactors to solve the historically inherited problem of accumulating nuclear waste. This innovative technology is fundamentally different from existing ones due to the lack of the two key expensive technological conversion processes – uranium extraction and enrichment – and the existence of a technologically new conversion process – the multifold refabrication of the nuclear fuel which is combined with the immobilisation and final isolation of the high-level radioactive waste.
2016
Russia 2030: science and technology foresight
Russia, Ministry of Education and Science of the Russian Federation
Applied superconductivity
One of the most promising innovative directions to increase energy efficiency is applied superconductivity technology, namely the integrated development and establishment of production of a wide range of electro-technical equipment based on the latest technologies with the use of unique materials – high-temperature superconductors. In the commercial energy sector, the use of superconductors is particularly attractive in terms of creating cables and power engineering and electricity storage (inductive capacitors). Superconductive cables, on account of their extremely low energy loss, are able to display a higher level of energy-efficiency in networks, creating fundamentally new conditions to manage generation facilities and to export electricity. Superconductive energy storage technologies will smooth out peak loads and align voltage and current, offsetting electricity supply in the event of network incidents, which will make it possible to negate the varying nature of alternative generation. Electro-technical equipment and power units based on superconductivity are designed to increase efficiency on rail and sea transport, in the energy sector, in the oil and gas industry, in the manufacturing sector, and others. Maximum results can be obtained by combining these with smart grid technologies. Russian developments in high-temperature superconductors are at various stages, from basic research to operational testing of prototypes of various forms of superconductor equipment. Forecasts of the Russian superconductor electrical equipment market are very optimistic and reflect its high potential and opportunities for long term growth. It is expected that the production volumes of various types of equipment (storage (5–20 MJ), current limiters (3–35 kW), generators (5–35 MW), electric motors (5–35 MW), synchronous compensators (5–35 MW), cables (1 km, 20 kW, 2 kA), transformers, etc.) will account for 36.5 billion roubles by 2020.
2016
Russia 2030: science and technology foresight
Russia, Ministry of Education and Science of the Russian Federation
Bio-technology
Biotechnology, genomics, and proteomics 1 are now major driving forces in the biological sciences and are increasingly being applied in the study of environmental issues, medicine and pharmaceuticals, infectious diseases, and modifications of food crops. Bio-technology has the potential to lead to sustainable solutions for a range of sustainable development issues. 2 or example, genetically modified organisms could help address food insecurity in developing countries, but their impact on ecosystems, human health and community values may need to be better understood to be considered a truly sustainable solution. 3 Experience has shown that deployment of such technologies needs to consider the local situations and possible trade-offs. 4 Synthetic biology is a field of great promise and possible dangers. Tailor-made medical solutions, gene therapy, technology disruption in the food industry, bio-engineered medicines, and precise bio-inspired drug delivery systems that target specific infected cells - together with stem cells - give many promises. However, if inappropriately used, it could cause irreversible changes to human health and environment. 5, 6, 7 Synthetic biology requires effective policies and frameworks to manage all stages of their life- time, including manufacturing, distribution and use, as well as safe disposal or where possible effective recycling. 8, 9, 10 New and emerging gene-editing technologies and their implications, benefits, and potential ethical problems for biotechnology and medicine have generated international scientific debate, with recommendations to establish norms concerning acceptable uses of human germline editing and harmonize regulations. 10 Genuine “human engineering” may not be far off in the future, when technologies related to gene-editing, stem cells and computational models of the human brain will be combined.
2016
Global sustainable development report 2016
United Nations
Digital Technology
Digital information and communications technologies (ICTs) have continued to rapidly advance. All parts of the world are now major users. Mobile phone ownership in Africa is now comparable to that in the USA, with about one connection per capita. Yet, while some digital gaps have closed, others continually open with the introduction of new technologies. In the context of implementing SDGs in Africa, information and communications technologies may play a role comparable to that of machines in the replacement of labour in the industrial age. 11 However, whereas the machines of the industrial era functioned as isolated and individual artefacts in one local environment, ICTs and knowledge creation exist as a hierarchy of networks that bring about innovations. 12, 13 Great technology potential has been accompanied by equally great concerns about social, political, economic and environmental impacts . The new fifth generation (5G) mobile phones enable vastly faster data connections than traditional phones. The “Internet of Things” is emerging and it interconnects physical objects to internet infrastructure. 3D printing enables the making of three-dimensional objects from a digital file, and together with robotics it has the potential to significantly alter the geographical distribution of manufacturing with important impacts on global labour markets and imbalances. “Big data” technologies transform the way governments, citizens, and companies do business, but they have led to concerns about erosion of privacy and freedom of expression. Similarly, wireless sensor networks have great efficiency potentials in many areas, but there are concerns about their impact on privacy, freedom and development. Big Data and the Internet of Things through the use of huge datasets and Internet-connected sensors potentially adds to the existing toolkit for sustainable development (e.g., in health, agriculture, food security, sustainable urbanization, etc.), but can also introduce risks related to data privacy and security. Because of cloud computing platforms that provide low-cost access to compute and storage capabilities as well as Free and Open Source Big Data and Internet of Things technologies, such technologies can serve as platforms for locally-relevant, pro-poor innovation without significant capital investments. However, this requires the requisite local talent to tailor solutions to local needs. National governments must also consider the limits of big data analysis (especially for causal inference and policy analysis), how such technologies can serve existing national development planning, regulatory frameworks for securing the rights of citizens with respect to privacy and security, and strengthening human capital and the larger ecosystem to effectively use such tools. 14 “Big data” has transformed the volume, velocity, and character of the information that we are able to procure regarding virtually every aspect of human life. 15 Online participatory tools increasing transparency and accountability in global sustainable development governance allow greater access to sharing of substantive information on the issues addressed by the civil society, international organisations and member states for realization of agenda 2030. 16 At the same time, the scientific community highlighted the idea that the most sustainable way to bring the deepest results of the digital revolution to developing communities is to enable them to participate in creating their own technological tools for finding solutions to their own problems. 17 120 | Global Sustainable Development Report 2016 3D Printing (3DP) can cost-effectively lower manufacturing inputs and outputs in markets with low volume, customized and high-value production chains. It could potentially help countries and regions that did not participate in the industrial revolution develop new manufacturing capabilities, especially for low volume, highly complex parts. Applications range from automobile and aerospace manufacturing to rapid-prototyping, healthcare, and education. Low cost consumer 3DP printers can help local people in developing and developed countries to produce a range of useful products, from basic assistive technologies to educational aids. For example, the projects of the Rapid Foundation in India and Uganda have shown that low cost printers are easy to build, use, fix or modify and are robust in remote locations. With expert training, anybody can become comfortable with using these printers in a few hours. 18 Further low-cost applications in science, education and sustainable development are detailed in a recent ICTP open book. 19 3D printing presents a number of challenges, including possibly disrupting existing manufacturing global value chains, decreasing labour demand for housing and construction, and potentially enabling the physical production of illegal 3D models that could pose both economic and security threats. There are potential environmental benefits (lower energy use, resource demands and CO 2 ), if 3D printing displaces existing transportation and logistics routes for shipping of goods and products. A recent study concluded: “ If 3DP was applicable to larger production volumes in consumer products or automotive manufacturing, it contains the (theoretical) potential to absolutely decouple energy and CO 2 .” 20 However, as 3DP is expected to remain a niche technology by 2025 reductions in energy and CO 2 emission intensities of industrial manufacturing could only be reduced by a small factor through 3DP by that date. Massive Open Online Courses potentially provide resource- poor regions and individuals more equitable access to world-class education content. Widespread global Internet access is impacting how we learn, as seen in the availability of various online learning platforms such as massive open online courses (MOOCs). 21 With low-cost replication of recognized content and education, personalized, self- paced learning, and interactive data-driven user interfaces, students potentially have access to material that previously would have been out of reach. However, MOOCs may not provide locally-relevant content tailored to a specific national context. Furthermore, MOOCs could replace the jobs of existing teachers and widen existing educational divides (i.e., providing a disproportionate advantage to individuals with access to the Internet and education). One nonprofit university based in Rwanda combines online learning content with in-person seminars to deliver degree programs that are locally-relevant, appropriately priced, and stimulate local employment. At this point, the potential impact of MOOCs requires more study, both globally in terms of existing platforms as well as of users in specific national contexts, along with implications for educational systems and employment. Optimal system use of radio, mobile phone, GIS and remote sensing technologies is considered vital for transforming rural populations. 22 The use of GIS to monitor an ever wider array of parameters at ever higher spatio-temporal resolutions allows us to consistently and constantly measure and monitor a huge array of environmental factors, allowing the enforcement of regulations, which would otherwise be impossible. 23, 24 Yet, data management remains a challenge for many countries, as they lack both skilled staff and technologies for effectively collecting or reporting reliable data. Many of the commonly used spatial database platforms are proprietary and are too expensive for many organizations in developing countries. 25
2016
Global sustainable development report 2016
United Nations